Waterproof Durable Black Self-adhesive Safety Luminous Anti-slip Tape

Anti-slip tape is a high-adhesion, durable safety tape designed to prevent slips and falls on smooth or wet surfaces. It features an abrasive grit or textured surface that enhances traction, making it ideal for stairs, ramps, walkways, and industrial areas.

Strong Adhesion: Residue-free adhesive ensures long-lasting hold on various surfaces (wood, metal, concrete, etc.).

Slip Resistance: Grit-coated or patterned surface provides excellent grip, even in wet/oily conditions.

Durability: Resistant to water, chemicals, and wear, suitable for indoor/outdoor use.

Visibility: Available in bright colors (yellow, black, red) or reflective options for hazard alerts.

Easy Installation: Peel-and-stick design; can be cut to custom sizes.

Stair Tread Edges

Applied to leading edges of metal/concrete steps to prevent slips in high-traffic zones.

Standard Width: 50–75mm for optimal visibility.

Mezzanine Walkways

Secures elevated platforms near machinery; withstands oil/grease exposure.

Loading Docks & Ramps

Heavy-duty tape (≥1.0mm thick) with #60–#80 grit for wet/icy conditions.

Anti-slip tapes are designed to adhere to a variety of surfaces, provided the surface is properly prepared (clean, dry, and smooth). Their suitability depends on factors like the surface material, texture, and environmental conditions (e.g., indoor vs. outdoor, exposure to water or chemicals). Here are the main types of surfaces they work well with:

1. Hard, Smooth Surfaces

These are the most common and ideal surfaces for anti-slip tape, as they allow strong adhesion and maximum contact with the tape’s adhesive backing.

Concrete: Both indoor (e.g., garage floors, workshop surfaces) and outdoor (e.g., sidewalks, ramps) concrete. Unsealed or slightly rough concrete may require extra cleaning to remove dust, but the tape adheres effectively once prepped.

Wood: Smooth wooden surfaces such as stair treads, wooden ramps, workbenches, or furniture. Ensure the wood is sealed (not raw or splintered) to prevent moisture from affecting adhesion.

Metal: Non-porous metals like steel or aluminum, commonly found on ladders, scaffolds, machinery, or vehicle steps. Clean thoroughly to remove rust, oil, or grease first.

Tile: Ceramic, porcelain, or stone tiles in bathrooms, kitchens, swimming pool areas, or commercial lobbies. Works best on unglazed or slightly textured tiles (glazed tiles may need extra cleaning to remove wax or residue).

Plastic: Smooth plastic surfaces, such as playground equipment, plastic ramps, or tool handles. Ensure the plastic is not oily or covered in a protective film.

2. Semi-Rough or Textured Surfaces

Anti-slip tape can adhere to moderately textured surfaces, though adhesion may be slightly reduced compared to smooth surfaces.

Painted surfaces: Glossy or semi-gloss painted walls, stairs, or floors (e.g., in offices, schools). Avoid peeling or chipped paint, as the tape may lift along with loose paint.

Asphalt: Outdoor asphalt surfaces like driveways, walkways, or parking lot ramps. Choose weather-resistant tape designed to withstand UV rays and temperature changes.

Laminate: Smooth laminate floors or countertops in kitchens, offices, or retail spaces. Clean to remove any wax or polish that could hinder adhesion.

3. Surfaces to Approach with Caution

While anti-slip tape can work on these surfaces under specific conditions, adhesion may be weaker or temporary:

Porous surfaces: Highly porous materials like unglazed brick, rough stone, or unfinished wood. The adhesive may not form a strong bond due to uneven texture—sealing the surface first can improve results.

Dirty or greasy surfaces: Surfaces with oil, grease, mold, or heavy dirt (e.g., garage floors, industrial machinery). Thorough cleaning with degreasers or alcohol is critical; otherwise, the tape will fail to stick.

Flexible surfaces: Soft or flexible materials like rubber mats, vinyl flooring, or fabric. Adhesion may weaken over time as the surface bends or stretches.

Extremely rough surfaces: Surfaces with deep grooves, cracks, or heavy rust. The tape may not lay flat, leading to air bubbles and reduced grip.

Always check the tape manufacturer’s guidelines, as some products are formulated for specific surfaces (e.g., outdoor use, wet environments, or metal). Proper surface preparation—cleaning, drying, and smoothing minor imperfections—remains the most important factor in ensuring the tape adheres effectively and lasts.

1. Production Capacity & Scale 24/7 operations with 500,000+ rolls/day output (standard 48mm×50y).high-volume production for industrial, masking, and double-sided tapes.

2. Core Technologies & Equipment German servo-driven extruders process BOPP/PVC/PET substrates at 150m/min.Laser-guided slitting/rewinding systems with ±0.1mm width tolerance.

3. Precision & Quality Control coating thickness accuracy ±0.002mm (Swiss precision gauges).CCD vision inspection and closed-loop tension control ensure <0.3% defect rate.

4. Automation & Smart Systems AGV robots and intelligent palletizing for end-to-end material handling.real-time MES monitoring with <0.5s anomaly response.Honeywell sensors for process optimization.

5. Sustainability & Compliance RTO emission treatment units and ISO 14001 certification.Energy-efficient,closed-loop production cycles.

ü Our packaging and logistics systems combine automated cartoning, robotic palletizing (1,200 rolls/minute), and smart inventory tracking to ensure rapid, error-free order processing.

ü Climate-controlled warehouses with RFID technology safeguard product quality across 50,000+ pallet spaces.

ü Partnering with global logistics leaders, we offer flexible air/sea/land freight options with 98.5% on-time delivery, enhanced by AI route optimization.

ü Sustainable FSC-certified recyclable packaging and ISO 14001-aligned processes minimize environmental impact, delivering efficiency from production to worldwide destinations.

Q:Are you factory or trading conpany

A:We are real factory located in zhengzhou city Henan province,anytime can visit our factory

Q:What product is your factory supplying

A:All kinds of tape we can make,masking,opp,double side,fiberglass...

Q: What payment methods are accepted?

A: TT, L/C,  30%-50% deposit for initial orders.

Q: What is the lead time?

A: Standard orders: 7-15 days; expedited orders: as fast as 5 days (subject to capacity).